Display Panel Control Unit Removal/Installation

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio-HVAC display module assembly (see AUDIO-HVAC DISPLAY MODULE ASSEMBLY REMOVAL/INSTALLATION ).
Remove the screws and bolts, then separate the audio unit (A) and display panel control unit (B).
NOTE: To avoid the damage, remove the screws (C) first, then remove the bolts (D).

Fig 1: Identifying Display Panel Control Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio unit to the display panel control unit in the reverse order of removal.