LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Keyless/Power Door Locks/Security System) >> Security Indicator Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Indicator Test

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector from the security indicator.
    Fig 1: Identifying Security Indicator 2P Connector
    G05462647Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. The LED should come on when battery power is connected to terminal No. 2, and ground is connected to terminal No. 1.
  4. If the LED does not work as specified, replace the security indicator.
scientia non olet · About LEMON Manuals