Door Key Cylinder Switch Test
- Remove the driver's door panel (see
FRONT DOOR PANEL REMOVAL/INSTALLATION
).
- Disconnect the 3P connector from the key cylinder switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the terminals.
- There should be continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is in LOCK position.
- There should be no continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is in the neutral or UNLOCK position.
- There should be continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is in UNLOCK position.
- There should be no continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is in the neutral or LOCK position.
- If the continuity is not as specified, replace the door key cylinder switch (see
FRONT DOOR OUTER HANDLE REPLACEMENT
).