TPMS Reset Procedures: Notes
NOTE:
When a tire pressure sensor is replaced or tires are rotated, the sensor ID must be memorized by the TPMS control unit. See Memorizing Sensor ID (Automatically) . If the TPMS control unit has also been replaced, the Honda Diagnostic System (HDS) or a OBD-II compatible scan tool must be used to program information into new TPMS control unit. See Memorizing Sensor ID (Using HDS) .
When the tire pressure warning light illuminates and warning message appears, immediately check air pressure of all tires and adjust to the specified pressure. Ensure warning indicators go out.