Entering Security Code
WARNING: This page is about a different car, the 2005 Acura TSX and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
The navigation system and audio unit have a coded theft protection circuit. Make sure you have the anti-theft security codes number before;
- Disconnecting the battery
- Disconnecting the navigation unit 8P connector
- Removing the No. 7 (10 A) fuse from the under-dash fuse/relay box
After service, reconnect power to the navigation unit, and turn the ignition switch ON (II). Enter the 4-digit anti-theft security code, then select "Done".
When replacing the navigation unit or audio unit, be sure to give the client the new anti-theft security code.