Navi System Link
WARNING: This page is about a different car, the 2005 Acura TSX and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
- This diagnostic tests the cables connecting the navigation components. Ensure that the ignition switch is in the ON (II) position. When the diagnostic begins, you hear a "bong" sound. The system is in a "Detecting" mode, and is waiting for all items in white to be tested. This includes the navigation voice control (TALK/BACK) buttons, and microphone. Press the navigation TALK button on the steering wheel, and in a normal voice, say "testing". The talk indicator on the screen should turn green, and the voice level indicator should move to at least the 6th bar to pass. Next, press the navigation BACK button. The "Cancel" indicator should turn green.
- If all of the communication lines connecting the system components, and the navigation TALK/BACK buttons/microphone check out OK (all block diagram items are green), then the "OK" indicator turns green.
- If there is a problem with the system, the faulty system component item turns red, and the screen will show "NG" in red. Use the troubleshooting, and other diagnostic screens to help locate the problem.
- The indication on the screen will not change until you cycle the ignition switch. After repairing the affected cable or system, repeat this diagnostic.NOTE: Green boxes and green "OK" indicate that the communications lines (cables) are intact. This diagnostic does not necessarily imply that the individual components are functioning properly. For instance, the GPS antenna wire may be crushed, but still show as "green". A road test, or other diagnostic may be necessary to find the problem.
- This navigation system is designed for use in the US or Canada market.
- US Market: English is the only language choice.
- Canada Market: On the disclaimer screen, English or French can be selected.
- Touch the "Chg Canada" or "Chg US" button to select the desired choice.
- Select "Return" to return to the Diagnosis Menu.
NOTE:
- The mic level indicator must reach the 6th bar or greater to pass the test.
- For '05 Model; If the XM link is red or flashing red, go to audio system symptom troubleshooting.