LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2008 >> CSX Base, K20A3 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> MAF Sensor/IAT Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

MAF Sensor/IAT Sensor Replacement

  1. Disconnect the MAF sensor/I AT sensor connector (A).
    Fig 1: MAF Sensor/IAT Sensor Connector With Torque Specifications
    G06264637Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the screws (B).
  3. Remove the MAF sensor/IAT sensor (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals