Audio Remote Switch Test
- Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
- Remove the 20P connector from the cable reel.
- Measure the resistance between the No. 17 and No. 18 terminals in each switch position according to the table.RESISTANCE SPECIFICATIONS
Position Resistance OFF About 10 kΩ MODE About 3.7 kΩ CH (+) About 1.7 kΩ CH (-) About 775 Ω VOL. UP About 357 Ω VOL. DOWN About 100 Ω - If the resistance is not as specified, replace the audio remote switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ).