LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2008 >> TL Base >> Repair and Diagnosis >> Engine Performance >> System >> Variable Valve Timing And Lift Electronic Control (VTEC) >> Rocker Arm Oil Pressure Switch Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rocker Arm Oil Pressure Switch Removal/Installation

  1. Disconnect the rocker arm oil pressure switch 2P connector (A), then remove the rocker arm oil pressure switch (B).
    Fig 1: Rocker Arm Oil Pressure Switch With Torque Specifications
    G05458226Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals