Intake Air Resonator Removal/Installation

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the splash separator (A)

Fig 1: Identifying Splash Separator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Do the battery removal procedure (see BATTERY REMOVAL AND INSTALLATION )
Remove the air cleaner (see THROTTLE BODY CLEANING )
Remove the battery base (A)

Fig 2: Battery Base With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the intake air duct (A)

Fig 3: Identifying Intake Air Duct
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION )
Remove the intake air resonator (A)

Fig 4: Intake Air Resonator With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
J37A4 engine: Remove the brake duct (B).
Install the parts in the reverse order of removal
Do the battery installation procedure (see BATTERY REMOVAL AND INSTALLATION )