LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System >> DTC Troubleshooting >> DTC P060A: PCM (A/T system) Internal Control Module Malfunction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P060A: PCM (A/T system) Internal Control Module Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
  1. Turn the ignition switch ON (II).
  2. Clear the DTC with the HDS.
  3. Check for Temporary DTCs or DTCs with the HDS.

    Is DTC P060A indicated? 

    YES  -Go to step 4.

    NO  -Intermittent failure, the system is OK at this time.

  4. Update the ECM/PCM if it does not have the latest software (see UPDATING THE ECM/PCM ), or substitute a known-good ECM/PCM (see SUBSTITUTING THE ECM/PCM ).
  5. Check for Temporary DTCs or DTCs with the HDS.

    Is DTC P060A indicated? 

    YES  -If the PCM was updated, substitute a known-good PCM (see SUBSTITUTING THE ECM/PCM ), then recheck. If the PCM was substituted, go to step  1.

    NO  -If the PCM was updated, troubleshooting is complete. If the PCM was substituted, replace the original PCM (see ECM/PCM REPLACEMENT  ). If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.

scientia non olet · About LEMON Manuals