LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Electronic Throttle Control System) >> Accelerator Pedal Module Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the accelerator pedal pad (A) to the pedal stop (B) Slide the pad until it locks with a clicking sound
    Fig 1: Installing Accelerator Pedal Pad To Pedal Stop
    G05987528Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install a new clip (A)
    NOTE:
    • The clip must be replaced whenever the accelerator pedal module is installed
    • Make sure that the accelerator pedal module and the clip are secure
      • Fig 2: Installing Clip With Torque Specification
      G05987529Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the nuts (B), and connect the APP sensor 6P connector (C)
scientia non olet · About LEMON Manuals