Control Unit: Service and Repair

SH-AWD Control Unit Replacement

NOTE: The SH-AWD control unit must be initialized SH-AWD Control Unit Initialization after replacement, other wise the SH-AWD system will not function.

1. Remove the rear left side trim panel cover. Interior Trim Removal/Installation - Rear Side Area

2. Remove the cargo floor lid and the cargo box. Interior Trim Removal/Installation - Cargo Area

3. Remove the SH-AWD control unit (A).

4. Disconnect the SH-AWD control unit connectors (B).

5. Install the SH-AWD control unit in the reverse order of removal.