DVD-ROM/CD-ROM Replacement
NOTE:
- Do not replace the DVD-ROM to give a client a preview of an updated DVD.
- Check any official Honda service website for more service information about the navigation system.
- Turn the ignition switch to ON (II).
- Push the open button (A) of the navigation unit located on the left side of the trunk.
- Press the EJECT button (B).
- Remove the DVD-ROM/CD-ROM.
- Insert the new DVD-ROM/CD-ROM with the white label facing up.
- Close the front cover. Do not turn the ignition switch to LOCK (0); watch the navigation screen until the data is downloaded to the navigation unit.
- Do the Map Matching (see
MAP MATCHING ).NOTE: After servicing, the front cover and PC card slot door must be closed.