Throttle Actuator Control Module Replacement
WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
- Push the tab (A) and disconnect the throttle actuator control module 16P connector (B).
- Remove the bolts (C), and the throttle actuator control module (D).
- Install the parts in the reverse order of removal.