Keyless Buzzer Test/Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left inner fender (see FRONT INNER FENDER REPLACEMENT ).
Disconnect the 2P connector (A) and remove the keyless buzzer by releasing the hooks (B).

Fig 1: Identifying Keyless Buzzer 2P Connector Terminal With Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the buzzer by connecting battery power to the No. 2 terminal and grounding the No. 1 terminal of the buzzer momentarily; the buzzer should sound.
If the buzzer does not sound, replace the keyless buzzer.