DTC U0199: Power Control Unit Lost Communication With Door Multiplex Control Unit
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Press the engine start/stop button to select the OFF, ACC, and ON mode.
- Wait for at least 10 seconds.
- Check for DTCs with the HDS.
Is DTC U0199 indicated?
YES -Go to the door multiplex control unit input test, and do all power, ground, and communication input tests (see MICU INPUT TEST ). If the tests prove OK, replace the power window master switch (see POWER WINDOW MASTER SWITCH REPLACEMENT ).
NO -Intermittent failure, the system is OK at this time. Check for loose or poor connections between the power control unit and the door multiplex control unit.