Drive Belt Inspection

Remove the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT )
Inspect the belt for cracks or damage If the belt is cracked or damaged, replace it (see DRIVE BELT REPLACEMENT )
Check that the position of the auto-tensioner indicator (A) is within the standard range (B) as shown If it is out of the standard range, replace the drive belt (see DRIVE BELT REPLACEMENT )

Fig 1: Identifying Auto-Tensioner Indicator With Standard Range
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT )