LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2010 >> TL Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Climate Control >> Driver's Mode Control Motor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver's Mode Control Motor Replacement

  1. Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION )
  2. Disconnect the 7P connector (A) from the driver's mode control motor (B) Remove the self-tapping screws and the driver's mode control motor from the heater unit
    Fig 1: Identifying Driver's Mode Control Motor And 7P Connector
    G05988696Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the motor in the reverse order of removal Make sure the pin on the motor is properly engaged with the linkage After installation, make sure the motor runs smoothly
scientia non olet · About LEMON Manuals