Engine Mechanical

ENGINE MECHANICAL TORQUE SPECIFICATIONS

Location

Item

Remark

Torque

Engine assembly

Front engine mount bracket bolts

Use new bolts

38 N.m (3.9 kgf.m, 28 lbf.ft)

Front engine mount bolt (10 mm) Qty 1

Use new bolt

54 N.m (5.5 kgf.m, 40 lbf.ft)

Front engine mount bolts (10 mm) Qty 4

Use new bolts

38 N.m (3.9 kgf.m, 28 lbf.ft)

Front engine mount stop nuts

Use new nuts

74 N.m (7.5 kgf.m, 54 lbf.ft)

Lower transmission mount bolt (10 mm) Qty 1

Use new bolt

54 N.m (5.5 kgf.m, 40 lbf.ft)

Lower transmission mount bolts (10 mm) Qty 3

38 N.m (3.9 kgf.m, 28 lbf.ft)

Power steering pump bracket bolts

22 N.m (2.2 kgf.m, 16 lbf.ft)

Rear engine mount bracket bolts

Use new bolts

88 N.m (9.0 kgf.m, 65 lbf.ft)

Rear engine mount bolt (10 mm) Qty 1

Use new bolt

54 N.m (5.5 kgf.m, 40 lbf.ft)

Rear engine mount bolts (10 mm) Qty 4

Use new bolts

54 N.m (5.5 kgf.m, 40 lbf.ft)

Rear engine mount base bolts (10 mm) Qty 2 (front side)

Use new bolts

42 N.m (4.3 kgf.m, 31 lbf.ft)

Rear engine mount base bolts (10 mm) Qty 2 (rear side)

42 N.m (4.3 kgf.m, 31 lbf.ft)

Rear engine mount stop nuts

Use new nuts

74 N.m (7.5 kgf.m, 54 lbf.ft)

Side engine mount bracket bolts (10 mm) Qty 3

44 N.m (4.5 kgf.m, 33 lbf.ft)

Side engine mount bracket bolts (10 mm) Qty 2

Use new bolts

44 N.m (4.5 kgf.m, 33 lbf.ft)

Side engine mount bolt (12 mm)

Use new bolt

54 N.m (5.5 kgf.m, 40 lbf.ft)

Side engine mount bolts (10 mm)

38 N.m (3.9 kgf.m, 28 lbf.ft)

Engine block

Rocker arm oil control solenoid assembly bolts

22 N.m (2.2 kgf.m, 16 lbf.ft)

Engine lubrication

Oil filter

12 N.m (1.2 kgf.m, 9 lbf.ft)

Oil filter feed pipe

Use oil on threads

35 N.m (3.6 kgf.m, 26 lbf.ft)

Oil pan drain bolt

Use new washer

39 N.m (4.0 kgf.m, 29 lbf.ft)

Oil pressure switch

Use new O-ring
Use liquid gasket on threads

22 N.m (2.2 kgf.m, 16 lbf.ft)

Intake manifold and exhaust system

Intake manifold bolts⁽¹⁾

22 N.m (2.2 kgf.m, 16 lbf.ft)

Intake manifold nuts⁽¹⁾

22 N.m (2.2 kgf.m, 16 lbf.ft)

Injector base bolts

22 N.m (2.2 kgf.m, 16 lbf.ft)

Injector base nuts

22 N.m (2.2 kgf.m, 16 lbf.ft)

Exhaust pipe A self-locking nuts (Warm up TWC side)

Use new nuts

54 N.m (5.5 kgf.m, 40 lbf.ft)

Exhaust pipe A self-locking nuts (Under-floor TWC side)⁽¹⁾

Use new nuts

54 N.m (5.5 kgf.m, 40 lbf.ft)

Muffler self-locking nuts

Use new nuts

33 N.m (3.4 kgf.m, 25 lbf.ft)

NOTE:

Refer to the S/M section for the precautions and complete procedures.
Refer to the S/M section for the bolts/nuts not indicated here.

⁽¹⁾	Parts to be tightened in particular orders.