LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> MDX >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Heating) >> Heater Control Panel Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heater Control Panel Removal/Installation

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center panel (see AUDIO UNIT REMOVAL/INSTALLATION ).
  2. Remove the control cables from the blower/heater unit (see RECIRCULATION CONTROL CABLE ADJUSTMENT  ).
  3. Pull out the right portion of the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  4. Remove the screw, and pull out the heater control panel (A) to access the electrical connectors.
    Fig 1: Identifying Heater Control Panel
    G05959769Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Disconnect the connectors, and remove the heater control panel along with the control cables.
  6. Install the control panel in the reverse order of removal. After installation, operate the controls to make sure they work properly.
scientia non olet · About LEMON Manuals