DTC 87: Current Flow into Wheel Speed Sensor Input Amplifier
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0), then turn it to ON (II) again.
- Check for DTCs with the HDS.
Is DTC 87 indicated?
YES -Do the DTC 11, 13, 15, or 17 troubleshooting (see DTC 11, 13, 15, 17: WHEEL SPEED SENSOR (OPEN/SHORT TO BODY GROUND/SHORT TO POWER) ).
NO -Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting (see INTERMITTENT FAILURES ).