LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> ZDX >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator Removal and Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Alternator Removal and Installation: Installation

  1. Install the alternator, then tighten the mounting bolt (A) and the alternator bracket mounting bolt (B).
    Fig 1: Alternator Bracket Mounting Bolt With Torque Specifications
    G08074395Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the bolt (A) securing the harness holder (B).
    Fig 2: A/C Compressor Clutch Connector, Harness Holder And Bolt With Torque Specifications
    G08074396Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Connect the A/C compressor clutch connector (C) to the A/C compressor.
  4. Connect the alternator connector (D) and the positive alternator cable (E) to the alternator. Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.
  5. Install the drive belt (see DRIVE BELT REPLACEMENT  ).
  6. Install the A/C condenser fan shroud assembly (see A/C CONDENSER FAN SHROUD INSTALLATION ).
  7. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
scientia non olet · About LEMON Manuals