LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2011 >> ZDX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Humidity/In-Car Temperature Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Humidity/In-Car Temperature Sensor Replacement

  1. Remove the driver's dashboard trim (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
  2. Disconnect the connector (A) from the humidity/in-car temperature sensor (B).
    Fig 1: Identifying Connector And Humidity/In-Car Temperature Sensor
    G08076423Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Unhook the lock tabs (C) of the humidity/in-car temperature sensor, and pull it
  4. Disconnect the aspirator hose (A), and remove the humidity/in-car temperature sensor.
    Fig 2: Identifying Aspirator Hose And Humidity/In-Car Temperature Sensor
    G08076424Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals