Speaker Test/Replacement: Tweeter

From the notch (A) carefully pry the tweeter grille (B) out of the dashboard with a small screwdriver. Be careful not to damage the tweeter grille and the dashboard.

Fig 1: Identifying Tweeter Grille Dashboard
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 2P connector (C) from the tweeter.
Remove the tweeter (A) from the speaker grille by prying at the hook (B).

Fig 2: Identifying Tweeter
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check the capacitor (C) condition. If any problem is found, replace the tweeter.
Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor.
There should be about 6 Ω.

Fig 3: Measuring Resistance Between Tweeter Terminal No. 2
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the resistance is not as specified, replace the tweeter.