Using the HDS (Preferred method)
- Connect the HDS to the Data Link Connector (DLC).
- There are two ways to read the B-CAN code with the HDS.
- First method; If multiple DTCs are stored, be sure to follow the instructions in B-CAN system diagnosis, Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Second method; If no DTCs are retrieved, use B-CAN System Diagnostic Test Mode 2 (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE 1 AND TEST MODE 2 (WITHOUT THE HDS) ) to check all inputs related to failure.