BSI OFF Switch Test/Removal/Installation

Remove the driver's switch panel (see DRIVER'S SWITCH PANEL REMOVAL/INSTALLATION ).
Remove the BSI OFF switch (A) from the driver's dashboard lower panel (B).

Fig 1: Identifying BSI OFF Switch And Driver's Dashboard Lower Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
On the switch side, check for continuity between the BSI OFF switch 5P connector terminal in each switch position according to the table.

Fig 2: Identifying Continuity Chart With Connector End View
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, remove the BSI OFF switch.