DTC U3000-49: Control Module Internal Control Module Malfunction (2013-18)
NOTE:
Before you troubleshoot, review the General Troubleshooting Information for the AWD with intelligent control system
.
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| U3000-49 Control Module Internal Control Module Malfunction |
DTC (AWD)
- Problem verification:
Press the engine start/stop button to select the ON mode.
- 2. Clear the DTC with the HDS.
Clear DTC
- 3. Start the engine.
- 4. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame U3000-49 Control Module Internal Control Module Malfunction Is DTC U3000-49 indicated?
YES
The failure is duplicated. Update the AWD control unit if it does not have the latest software , or substitute a known-good AWD control unit , and recheck. If the symptom/indication goes away with the updated AWD control unit, troubleshooting is complete. If the symptom/indication goes away with a known-good AWD control unit, replace the original AWD control unit .
NO
Intermittent failure, the system is OK at this time.