LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2014 >> TSX V6 >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System (V6) >> Knock Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor Replacement

  1. Remove the intake manifold (see REMOVAL ).
  2. Remove the injector base (see INJECTOR BASE REMOVAL AND INSTALLATION ).
  3. Disconnect the knock sensor connector (A).
    Fig 1: Lnock Sensor With Knock Sensor Connector With Torque Specifications
    G06944189Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the knock sensor (B).
  5. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals