DTC P0607: Powertrain Control Module (PCM) Internal Circuit Malfunction (V6)

General Description 

This fault code is a general (specified by SAE) DTC that is stored at the time the following DTC codes (P16F0, P16F2, P16F9, P16FA, P16FB, P16FC) are detected.

Monitor Execution, Sequence, Duration, DTC Type, OBD Status 

Refer to the specific DTC information. (P16F0, P16F2, P16F9, P16FA, P16FB, P16FC)

Enable Conditions 

Refer to the specific DTC information. (P16F0, P16F2, P16F9, P16FA, P16FB, P16FC)

Malfunction Threshold 

P16F0, P16F2, P16F9, P16FA, P16FB, and/or P16FC is stored.

Possible Cause 

NOTE:  The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.

• PCM internal circuit failure

Diagnosis Details 

Conditions for setting the DTC 

The DTC is stored at the same time when DTC P16F0, P16F2, P16F9, P16FA, P16FB, or P16FC is stored. Refer to the specific DTC information.

Conditions for clearing the DTC 

The DTC is cleared at the same time when DTC P16F0, P16F2, P16F9, P16FA, P16FB, and P16FC are cleared. Refer to the specific DTC information.