Keyless Access System Inspection 2

Test Procedure 

• Procedure
• • With driver's power window open.
  • Turn the vehicle to the OFF (LOCK) mode.
  • Remove all the keyless remotes from inside the vehicle. Place the keyless remotes more than 20 cm (8.0 in) away from the vehicle.
  • Press the engine start/stop switch.
  • Put the keyless remotes into the vehicle to the all doors and tailgate closed.
  • Touch the engine start/stop switch with the keyless remote. The buttons on the keyless remote should be facing you.
  • Turn the vehicle to the ON mode.
  • Do the HDS [System Check].

• Normal Conditions
• • -

    N-1 is indicated.

Results 

• If it is abnormal, troubleshoot the keyless access system according to the result of the SYSTEM CHECK - Refer to: Keyless Access System Status Log or Keyless Access System Check .