Wheel Alignment - Specifications & Adjustments: Toe-In
Place wheels in straight-ahead position and measure toe-in. If toe-in is not to specifications, adjust by loosening lock nuts and adjusting tie-rods. Tighten lock nuts and recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | |
|---|---|---|---|---|---|
| Inner | Outer | ||||
| All Models | 4 1/2 ± 1/2 | 1/3 ± 1/2 | 5/64 | ..... | ..... |