Electronic Control Unit - TCU Mounting

ELECTRONIC CONTROL UNIT MOUNTING

Removal

1. Remove the ELECTRONIC CONTROL UNIT (TCU). Refer to MODULE, TRANSMISSION CONTROL (TCM), REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

2. Undo the fixing nut (1a) and disconnect the ground ring (1b).
3. Undo the fixing screws (2a) and remove the control unit mounting bracket (2b).

Installation

1. Fit the mounting bracket in its housing and tighten the fixing screws.
2. Connect the ground wire and tighten the fixing nut.
3. Install the ELECTRONIC CONTROL UNIT (TCU). Refer to MODULE, TRANSMISSION CONTROL (TCM), REMOVAL AND INSTALLATION .