Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Chassis Domain Control Module (CDCM) to Body Nuts | 5 | - | 44 | |
| Front Stabilizer Bar Bracket to Crossmember Bolt | 60 | 44 | - | |
| Hub and Bearing to Knuckle Bolts | 100 | 74 | - | |
| Lower Control Arm to Crossmember Bolt | 60 | 44 | - | |
| Lower Control Arm to Knuckle Nut | 71 | 52 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Stabilizer Bar Nut | 100 | 74 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Strut Nut | 100 | 74 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Strut to Body Nuts | 26 | 19 | - | |
| Strut Assembly to Lower Control Arm Bolts | 60 Plus 135° | 44 Plus 135° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Strut Rod to Strut Mount Nut | 50 | 37 | - | |
| Tension Strut to Knuckle Nut | 71 | 52 | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. | |
| Tension Strut to Crossmember Bolt | 51 Plus 120° | 38 Plus 120° | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. | |
| Upper Control Arm to Body | 28 | 21 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Upper Control Arm to Knuckle | 48 | 35 | - |