Technical Specifications: Specifications

NOTE:

This procedure must be performed after any front suspension mechanical components have been serviced in order to align the position of the wheels in relation to the body (e.g. control arms, steering knuckles, shock absorbers, springs etc.).

The wheel geometry/angle checks must be performed using appropriate alignment equipment after checking and adjusting the tire inflation pressure to the specified values and ensuring that the vehicle exhibits the following load conditions:

"Standard A" - vehicle including spare tire, tools, accessories, and a full tank of fuel.

Front Wheel Alignment Specifications
	Toe - Per Wheel	Caster - Per Side	Camber - Per Side
2.0 L	- 0.08° ± 0.07°	5.92° ± 0.30°	- 0.50° ± 0.33°
2.9 L	- 0.08° ± 0.07°	5.92° ± 0.30°	- 0.50° ± 0.33°

Rear Wheel Alignment Specifications
	Toe - Per Wheel	Camber - Per Side
2.0 L	0.22° ± 0.13°	- 1.50° ± 0.33°
2.9 L	0.22° ± 0.13°	- 1.50° ± 0.33°