Login procedure (scan tool function 11): Notes

NOTE: In order to carry out this function, the dealer code in the VAG1551/VAG1552 scan tool must have been entered. This is the dealer code for your dealership.

See Operating manual for VAG1551 scan tool, information about OBD

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Login Procedure (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -1- to select "Login Procedure" function 11.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Login Procedure (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press the -Q- button to confirm input.

Indicated on display

Fig 3: VAG 1551 Scan Tool Display - Login Procedure (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter the relevant code for the vehicle and press -Q- button to confirm input.
The code for logging in for zeroing of steering angle sensor -G85- is 40168.
For the codes for logging in to code the ABS Control Module (w/EDL) -J104-, see TEST SEQUENCE .