Engine installing: Notes

WARNING: This page is about a different car, the 2005 Audi allroad, 2004 Audi allroad, and 2003 Audi allroad. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Re-attach all cable ties at same location on installation.
Re-attach heat insulation sleeves at same location on installation.
Secure all hose connections with standard hose clamps. See Parts catalog
Replace self-locking nuts and bolts when performing assembly work.
Replace bolts tightened by turning through a specified angle as well as oil seals and gaskets.

Check whether dowel sleeves for centering engine/transmission in cylinder block have been fitted and install if necessary.
Install intermediate plate on dowel sleeves.