Toe Adjustment (Front)
WARNING: This page is about a different car, the 2004 Audi S4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before attempting any adjustments, see PRELIMINARY CHECKS
and WHEEL ALIGNMENT PROCEDURES
.
Loosen lock nut "B" on tie rod. See Fig 1 . Also, loosen rack boot outer clamp. Adjust toe by turning hex nut "A" until proper setting is reached. Do not allow boot to twist during adjustment, straighten twisted boots when toe in is set. Tighten tie rod lock nut to 30 ft. lbs. (40 N.m). Recheck toe adjustment.