LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2004 >> A8 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling Fan >> 4.2L - Generic Scan Tool, Engine Code(S): BFM >> 01 - On Board Diagnostic (OBD) >> On Board Diagnostics, General Information >> Wire and Component Test at Engine Control Module using VAG 1598/31 >> Wire and Component Test at Engine Control Module using VAG 1598/31 >> Engine Control Module, Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module, Installing

Installation is performed in reverse order, ECM must always be installed with the protective housing. New snap-off screws must be used.

Perform the following work after re-connecting Engine Control Module (ECM):

NOTE:
  • In the first adaptation phase during engine basic setting, it is possible that idle will be rough and vehicle may shake lightly in drive mode.