LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2004 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake System - On Board Diagnostic (OBD) >> 01 On Board Diagnostic (OBD) >> ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE >> Code Control Module (function 07)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code Control Module (function 07)

The control module installed in the vehicle is coded. New control modules from the parts distribution center are uncoded and must be coded after being installed.

Coding is only possible if a dealership number is stored in the VAG1551 scan tool.

Test sequence 

Rapid data transfer HELP
Select function XX

Indicated on display:

Rapid data transfer Q
07 - Code Control Module

Indicated on display:

Code Control Module Q
Enter code number XXXXX (13504)

Indicated on display:

"
Coding 13504 WSC XXXXX

VAG1551 Scan Tool (ST) display indicates control module coding.

Rapid data transfer HELP
Select function XX

Indicated on display:

NOTE:
  • If the control module is incorrectly coded, the ABS warning light -K47- remains constantly lit. The red "Brake system malfunction" symbol (left arrow) lights up after ignition is switched on and 10 km/h or 2000 engine RPM has been reached.
  • If the control module is uncoded (code 00000), the ABS warning light -K47- blinks once per second. The red "Brake system malfunction" symbol (left arrow) blinks after ignition is switched on and 10 km/h or 2000 engine RPM has been reached.
Coding table for ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE:

Engine/Power  Drive layout  Control module no.  Code number  Version 
1.8 L/132 kW Front 1J0 907 379 J 13204 ABS/EDL/ASR
1.8 L/132 kW Front 8N0 907 379 13204 ABS/EDL/ASR
1.8 L/132 kW Front 8N0 907 379 B 13204 ABS/EDL/ASR
1.8 L/132 kW
1.8 L/165 kW
All 8N0 907 379 A 13504 ABS/EDL
1.8 L/132 kW
1.8 L/165 kW
All 8N0 907 379 C 13504 ABS/EDL