Speech Input Control Module J507 , removing and installing

• Turn off all electrical components.
• Remove ignition key.

Removing 

• Remove right A-pillar trim → - 70 - INTERIOR TRIM .
• Remove right front seat → - 72 - SEAT - FRAMES .

Fig 1: Identifying Passenger Side Electronics Box Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release electronics box cover - arrows  - and remove it.

Fig 2: Identifying Connector For Speech Input Control Module J507

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect connector - 2  - on Speech Input Control Module J507 - 1  -.
• Remove Speech Input Control Module J507 - 1  -.

Installing: 

• Install in reverse order.
• Perform adaptations and coding on Speech Input Control Module J507 if necessary.