Knock Sensor 1
Removing
-- Remove the electrical connector -2- from the knock sensor 1 -G61-.
Fig 1: Camshaft Position Sensor G40/Intake Manifold Runner Position Sensor G336, Knock Sensor (KS) 1 G61 & Fuel Injectors 8-Pin Harness Connector Electrical Harness Connectors
-- Remove the coolant pump with the coolant thermostat. Refer to COOLANT PUMP .
NOTE:
The knock sensor 1 is located below the intake manifold behind the coolant pump.
-- Remove the knock sensor 1.
Installing
-- Installation is in reverse order.
- Tightening specification, refer to IGNITION ASSEMBLY OVERVIEW