Wheel Alignment Specifications: Notes

WARNING: This page is about a different car, the 2004 Audi S4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

FRONT AXLE WHEEL ALIGNMENT SPECIFICATIONS (A4 & S4)

Application

Preferred ⁽¹⁾

Range ⁽¹⁾

Standard Suspension (1BA)

Camber ⁽²⁾

-30'

-5' To -55'

Toe Per Wheel (Setting For Vehicle Curb Weight)

10'

8' To 12'

Toe Per Wheel (Checking For Vehicle Curb Weight)

10'

5' To 15'

Toe Constant Per Wheel (Setting) ⁽³⁾

7' To 11'

Toe Constant Per Wheel (Setting) ⁽⁴⁾

14'

12' To 16'

Toe Constant Per Wheel (Checking) ⁽³⁾

2' To 16'

Toe Constant Per Wheel (Checking) ⁽⁴⁾

14'

7' To 21'

Toe-out On Turns At 20° ⁽⁵⁾

1° 30'

1° To 2°

Sport Suspension (1BE & 1BV)

Camber ⁽²⁾

-47'

-22' To -1° 12'

Toe Per Wheel (Setting For Vehicle Curb Weight)

10'

8' To 12'

Toe Per Wheel (Checking For Vehicle Curb Weight)

10'

5' To 15'

Toe Constant Per Wheel (Setting) ⁽³⁾

7' To 11'

Toe Constant Per Wheel (Setting) ⁽⁴⁾

14'

12' To 16'

Toe Constant Per Wheel (Checking) ⁽³⁾

2' To 16'

Toe Constant Per Wheel (Checking) ⁽⁴⁾

14'

7' To 21'

Toe Constant, Difference Between Both Sides

10' Max.

.....

Toe-out On Turns At 20° ⁽⁵⁾

1° 30'

1° To 2°

Sport Suspension (1BD)

Camber ⁽²⁾

-47'

-22' To -1° 12'

Toe Per Wheel (Setting For Vehicle Curb Weight)

10'

8' To 12'

Toe Per Wheel (Checking For Vehicle Curb Weight)

10'

5' To 15'

Toe Constant Per Wheel (Setting)

20'

18' To 22'

Toe Constant Per Wheel (Check Value)

20'

13' To 27'

Toe Constant, Difference Between Both Sides

10' Max.

.....

Toe-out On Turns At 20° ⁽⁵⁾

1° 30'

1° To 2°

Comfort Suspension (1BR)

Camber ⁽²⁾

-21'

-46' To 4'

Toe Per Wheel (Setting For Vehicle Curb Weight)

10'

8' To 12'

Toe Per Wheel (Checking For Vehicle Curb Weight)

10'

5' To 15'

Toe Constant Per Wheel (Setting) ⁽³⁾

7' To 11'

Toe Constant Per Wheel (Setting) ⁽⁴⁾

14'

12' To 16'

Toe Constant Per Wheel (Checking) ⁽³⁾

2' To 16'

Toe Constant Per Wheel (Checking) ⁽⁴⁾

14'

7' To 21'

Toe-out On Turns At 20° ⁽⁵⁾

1° 30'

1° To 2°

⁽¹⁾	All measurements are given in degrees and minutes.

⁽²⁾	Maximum difference between sides is 30'.

⁽³⁾	Data is valid from sedan market introduction up to VIN 8E_2_025687.

⁽⁴⁾	Data is valid for sedan as of VIN VIN 8E_2_025688.

⁽⁵⁾	The angle of the outside wheel is less by this amount. Depending on alignment computer being used, this measurement may be indicated as a negative reading.

REAR AXLE WHEEL ALIGNMENT SPECIFICATIONS (A4 & S4 - ALL VARIATIONS)

Application

Preferred ⁽¹⁾

⁽¹⁾ Range

Camber ⁽²⁾

-1° 10'

-40' To -1° 40'

Overall Toe ⁽³⁾

30'

20' To 40'

⁽¹⁾	All measurements are given in degrees and minutes.

⁽²⁾	Maximum difference between sides is 30'.

⁽³⁾	Maximum permanent deviation from direction of travel in relation to longitudinal axis of vehicle is +/- 10'.