LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2008 >> A6 Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Wheel Change Initialization
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Change Initialization

NOTE: If tire or tire pressure sensor was changed, the TPMS must be initialized.
NOTE: Initialization process can take up to 20 minutes. During this time, the sensors are readjusting to the new wheel/tire combination and the monitoring system is operating at reduced sensitivity. The system will only warn when tire pressure drops below the minimum permissible specified pressure (warning symbol and message will appear).
  1. Ensure air pressure in all tires is properly adjusted to specification.
  2. On the center instrument cluster display, press the CAR function button. See Figure.
  3. Select "TIRE PRESSURE MONITORING".
  4. Select "WHEEL CHANGE".
scientia non olet · About LEMON Manuals