New Control Module, Installing

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Excessive shaking (for example, dropping, impact) may destroy the control module. The control module must then no longer be used.

Surface must be cleaned before assembling.

NOTE:

Use new bolts.

A new control module may be installed a maximum of two times on a used hydraulic unit, to ensure that the elastic seal, seals sufficiently.

Do not install a used control module.

-- Carefully slide the control module without tilting it onto the hydraulic unit.

-- Tighten the hydraulic unit and control module diagonally and in stages to the tightening specification using the new accompanying TORX^® socket bolts.