Calibrating Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
The Vehicle Diagnostic Tester is connected.
- Select the Diagnostic mode and start the diagnosis.
- Select the test plan tab.
- Select the select individual test button and select the following tree structure consecutively:
- Body
- Electrical system
- 01 - OBD-capable systems
- 6C - peripheral camera control module | J928
- 6C - peripheral camera control module, functions
- 6C - Calibration, (Repair Group 91)
From here, the Vehicle Diagnostic Tester advances the calibration procedure forward.
WARNING:
Make sure light does not reflect off the -VAS6350A/6-.
Reflections affect the camera and may make it impossible to perform the calibration.
Reflections affect the camera and may make it impossible to perform the calibration.