LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2009 >> A6 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (3.0L - Engine Assembly - Engine Code: CCAA) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Component Bolt Size Nm
Bolts/Nuts    
  M6 9
  M7 15
  M8 20
  M10 40
  M12 65
Exceptions:
Drive Plate to Torque Converter 1 - 85
Left Engine Mount Bracket
Nut - 40
Bolt - 75
Left Engine Support
Nut - 40
Bolt - 75
Right Engine Mount
Nut - 40
Bolt - 75
Right Engine Support, Nut and Bolt - 40
Torque Bracket - 40
Torque Support Stop - 40
  • 1 Replace the bolts; only use original equipment bolts. Refer to the Parts Catalog.

Automatic Transmission to Engine Fastener

Fig 1: Automatic Transmission To Engine Fastener And Alignment Sleeves -A- (3.0L, Engine Code CCAA)
GWWA10-11090Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 M10 x 100 1) 65
2, 6 M12x120 65
3, 4, 5 M12 x 105 65
7 M12x130 65
8, 9, 10 M10x80 45
A Alignment sleeves for centering
  • 1) Bolt class 10.9.
scientia non olet · About LEMON Manuals