Night Vision System Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Loosen the front left seat und with the wires still attached and push rearward. Refer to FRONT SEATS . .

-- Remove the floor mat.

-- Remove the sill panel. Refer to OVERVIEW - SILL PANEL STRIP .

-- Remove the foot rest. Refer to FOOT REST, REMOVING AND INSTALLING .

-- Disengage the carpet and push aside.

-- Release the clips in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Open cover -1-.

-- Push the retaining tab in the direction of the -arrow- and remove the Night Vision System Control Module - J853- -3- from the E-box.

Courtesy of AUDI OF AMERICA, LLC

-- Release connectors -1 and 2- and remove from the Night Vision System Control Module - J853- -3-

First release connector -2- and then -1-.