Chip Card Reader Control Module, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal. Note the following:

-- Connect the connectors -3- and then push the clip -4- through the opening.

Courtesy of AUDI OF AMERICA, LLC

-- Make sure that all of the tabs -2- for the Chip Card Reader Control Module -J676- -1- engage into the trim.