Control Module for Emergency Call Module and Communication Unit -J949-, REPLACING

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Control Module for Emergency Call Module and Communication Unit -J949-, Replacing and Adapting

Current data for the "Guided Fault Finding"

-- Select the Replace control module function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Remove the Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Install the new Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Select the Coding function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Adapting to Immobilizer function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Activating function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- In the Guided Fault Finding or Guided Functions select the function "ERA-Glonass, Operating" using the Vehicle Diagnostic Tester --.

-- Switch off the ignition.